PTP RapidFire (5-N)
MODEL:LigoWave LigoDLB 5-90-20-PRO Integrated sectorLigoWave LigoDLB 5-90-20-PRO Integrated dual – polarized, 5Ghz, (2x2) MiMo sector antennna, 90 degrees, Up to 30 dBm, 1x Gbit LAN, 720 MHz CPU with 128 MB of Flash and RAM
• 700Mbps TCP throughput
• Supports up to 256 QAM
• 200,000 Packets per second
• Frequency range 4.900 - 6.100 GHz (FCC 4.940 - 4.990 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz)
• Channel sizes include 5, 10, 20, 40 and 80 MHz
• Two Gigabit Ethernet ports with PoE pass-through up to ~ 13 watts
• 2.4GHz radio for wireless connection to the device GUI for up to the 37 meters (120 ft) away
• Step by step Setup Wizard for simple configuration
• Remote device management from the master side
• Spectrum analyzer available for both ends at a single location and up to 24 hours of history
• Heavy duty mounting bracket with 45-degree antenna rotation facility
RapidFire delivers an extremely high 750 Mbps throughput via its unique and powerful RF design that supports up to 256QAM modulation and 31 dBi output power. Our proprietary W-Jet V protocol, specifically engineered for high performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms.
In addition to achieving maximum performance, LigoWave focuses on delivering flexibility and ease-of-use in our RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses and signal levels (in 1dBm steps) when aligning the antenna.
Powerful all-in-one hardware platform
LigoWave RapidFire delivers powerful performance with its new 1.2 GHz CPU dedicated for data processing and high (250,000) packet per second delivery. Equipped with two Gigabit Ethernet ports, one with PoE passthrough, the unit allows for 1 1 (failover) or repeater links and is ideal for high-security video surveillance scenarios. RapidFire incorporates integrated surge and ESD protection according to IEC standards and passes Class 4 requirements.
Wireless configuration interface
An internal 2.4 GHz radio allows access into the Rapidfire GUI by wireless connection with any WIFI equipped device. This feature expedites the installation of links and alleviates the problem of troubleshooting in difficult-to-reach locations. Tests prove accessibility even when mounted on top of a 10-story building while standing 20 meters (65 ft) away
The LigoPTP operating system ensures easy and rapid deployment of point-to-point links with stable, fast performance. An intuitive and responsive user interface adjusts the layout based on the size of your screen. Essential tools including Setup Wizard, link test, antenna alignment, spectrum analyzer, and site survey are included to make set-up and troubleshooting more efficient. Automatic mechanisms such as auto-channel and automatic transmit power control optimize the link for maximum performance even in areas with high interference.